Removing more autoconf-generated files

There is no need to keep INSTALL, install-sh, ltconfig, mkinstalldirs in git, as
they can be created by 'automake -a -c' as needed.

In fact, it turns out ltconfig and mkinstalldirs are not needed at all any more.

1 files changed, 0 insertions, 250 deletions

diff --git a/install-sh b/install-sh
deleted file mode 100755
index e843669..0000000
--- a/install-sh
+++ /dev/null
@@ -1,250 +0,0 @@
-#!/bin/sh
-#
-# install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
-#
-# Copyright 1991 by the Massachusetts Institute of Technology
-#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission.  M.I.T. makes no representations about the
-# suitability of this software for any purpose.  It is provided "as is"
-# without express or implied warranty.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-        -c) instcmd="$cpprog"
-            shift
-            continue;;
-
-        -d) dir_arg=true
-            shift
-            continue;;
-
-        -m) chmodcmd="$chmodprog $2"
-            shift
-            shift
-            continue;;
-
-        -o) chowncmd="$chownprog $2"
-            shift
-            shift
-            continue;;
-
-        -g) chgrpcmd="$chgrpprog $2"
-            shift
-            shift
-            continue;;
-
-        -s) stripcmd="$stripprog"
-            shift
-            continue;;
-
-        -t=*) transformarg=`echo $1 | sed 's/-t=//'`
-            shift
-            continue;;
-
-        -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-            shift
-            continue;;
-
-        *)  if [ x"$src" = x ]
-            then
-                src=$1
-            else
-                # this colon is to work around a 386BSD /bin/sh bug
-                :
-                dst=$1
-            fi
-            shift
-            continue;;
-    esac
-done
-
-if [ x"$src" = x ]
-then
-        echo "install:  no input file specified"
-        exit 1
-else
-        true
-fi
-
-if [ x"$dir_arg" != x ]; then
-        dst=$src
-        src=""
-        
-        if [ -d $dst ]; then
-                instcmd=:
-        else
-                instcmd=mkdir
-        fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad 
-# if $src (and thus $dsttmp) contains '*'.
-
-        if [ -f $src -o -d $src ]
-        then
-                true
-        else
-                echo "install:  $src does not exist"
-                exit 1
-        fi
-        
-        if [ x"$dst" = x ]
-        then
-                echo "install:  no destination specified"
-                exit 1
-        else
-                true
-        fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-        if [ -d $dst ]
-        then
-                dst="$dst"/`basename $src`
-        else
-                true
-        fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-#  this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='    
-'
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
-        pathcomp="${pathcomp}${1}"
-        shift
-
-        if [ ! -d "${pathcomp}" ] ;
-        then
-                $mkdirprog "${pathcomp}"
-        else
-                true
-        fi
-
-        pathcomp="${pathcomp}/"
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
-        $doit $instcmd $dst &&
-
-        if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
-        if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
-        if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
-        if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
-        if [ x"$transformarg" = x ] 
-        then
-                dstfile=`basename $dst`
-        else
-                dstfile=`basename $dst $transformbasename | 
-                        sed $transformarg`$transformbasename
-        fi
-
-# don't allow the sed command to completely eliminate the filename
-
-        if [ x"$dstfile" = x ] 
-        then
-                dstfile=`basename $dst`
-        else
-                true
-        fi
-
-# Make a temp file name in the proper directory.
-
-        dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
-        $doit $instcmd $src $dsttmp &&
-
-        trap "rm -f ${dsttmp}" 0 &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing.  If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
-        if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
-        if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
-        if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
-        if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
-
-# Now rename the file to the real destination.
-
-        $doit $rmcmd -f $dstdir/$dstfile &&
-        $doit $mvcmd $dsttmp $dstdir/$dstfile 
-
-fi &&
-
-
-exit 0