From bf0d2565860990f5f177d48919fc5990e1602094 Mon Sep 17 00:00:00 2001 From: Jim Ramsay Date: Tue, 10 Aug 2010 11:07:50 -0400 Subject: Removing more autoconf-generated files There is no need to keep INSTALL, install-sh, ltconfig, mkinstalldirs in git, as they can be created by 'automake -a -c' as needed. In fact, it turns out ltconfig and mkinstalldirs are not needed at all any more. --- .gitignore | 3 + INSTALL | 90 -- autogen.sh | 2 +- install-sh | 250 ----- ltconfig | 3114 --------------------------------------------------------- mkinstalldirs | 38 - 6 files changed, 4 insertions(+), 3493 deletions(-) delete mode 100644 INSTALL delete mode 100755 install-sh delete mode 100755 ltconfig delete mode 100755 mkinstalldirs diff --git a/.gitignore b/.gitignore index 111ef92..97868b9 100644 --- a/.gitignore +++ b/.gitignore @@ -48,3 +48,6 @@ util/fluxbox-remote util/fluxbox-update_configs util/startfluxbox version.h +INSTALL +install-sh +missing diff --git a/INSTALL b/INSTALL deleted file mode 100644 index ee8983e..0000000 --- a/INSTALL +++ /dev/null @@ -1,90 +0,0 @@ --- INSTALL for Fluxbox - -Compilation and Installation: --------------------------------- - The `configure' shell script attempts to guess correct values for -various system-dependent variables used during compilation. It uses -those values to create a `Makefile' in each directory in the -Fluxbox source tree. - -Finally, it creates a shell script `config.status' that you can run -in the future to recreate the current configuration, a file -`config.cache' that saves the results of its tests to speed up -reconfiguring, and a file `config.log' containing compiler output -(useful mainly for debugging `configure'). - - If you need to do unusual things to compile Fluxbox, please try -to figure out how `configure' could check whether to do them, and mail -diffs or instructions to fluxbox-developers list (see www.fluxbox.org) -so they can be considered for the next release. If at some point -`config.cache' contains results you don't want to keep, you may remove -or edit it. - - The file `configure.in' is used to create `configure' by a program -called `autoconf'. You only need `configure.in' if you want to change -it or regenerate `configure' using a newer version of `autoconf'. - -The simplest way to compile this package is: - - 1. `cd' to the directory containing the package's source code and type - `./configure' to configure the package for your system. If you're - using `csh' on an old version of System V, you might need to type - `sh ./configure' instead to prevent `csh' from trying to execute - `configure' itself. - - Running `configure' takes awhile. While running, it prints some - messages telling which features it is checking for. - - 2. Type `make' to compile the package. - - 3. Type `make install' to install the programs and any data files and - documentation. - - 4. You can remove the program binaries and object files from the - source code directory by typing `make clean'. To also remove the - files that `configure' created (so you can compile the package for - a different kind of computer), type `make distclean'. - - -Compilers and Options: ----------------------- - Some systems require unusual options for compilation or linking that -the `configure' script does not know about. You can give `configure' -initial values for variables by setting them in the environment. Using -a Bourne-compatible shell, you can do that on the command line like -this: - CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure - -Or on systems that have the `env' program, you can do it like this: - env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure - - -Optional Features: ------------------- -Fluxbox supports the XShape extension of X11R6. This support is enabled by -default, but may be overridden by specifying `--disable-shape' on the configure -script's command line. - -Fluxbox supports Window Maker dockapps (warning: restarts from wmaker to -fluxbox don't always handle dockapps correctly) with a gadget called the Slit. -The Slit is compiled into Fluxbox by default, but may be overridden by -specifying `--disable-slit' on the configure script's command line. - -Fluxbox supports a rendering effect called "faked interlacing" which darkens -every other line in rendered images. This support works only for gradient -images. It is compiled in by default, but may be overridden by specifying -`--disable-interlace' on the configure script's command line. - -Fluxbox uses a timer which allows it to periodically flush its pixmap -cache. It is enabled by default, but may be overridden by specifying -'--disable-timed-cache' on the configure script's command line. - -Also, `configure' can usually find the X include and library files -automatically, but if it doesn't, you can use the `configure' -options `--x-includes=DIR' and `--x-libraries=DIR' to specify -their locations. - - -Please read the README file also. - - diff --git a/autogen.sh b/autogen.sh index 4a135c1..e5bcba9 100755 --- a/autogen.sh +++ b/autogen.sh @@ -16,7 +16,7 @@ libtoolize --copy --force --automake rm -f config.cache dothis aclocal -I . ${ACLOCAL_FLAGS} dothis autoheader -dothis automake --add-missing --warnings=none -a +dothis automake -a -c --warnings=none dothis autoconf echo 'Success, now continue with ./configure' diff --git a/install-sh b/install-sh deleted file mode 100755 index e843669..0000000 --- a/install-sh +++ /dev/null @@ -1,250 +0,0 @@ -#!/bin/sh -# -# install - install a program, script, or datafile -# This comes from X11R5 (mit/util/scripts/install.sh). -# -# Copyright 1991 by the Massachusetts Institute of Technology -# -# Permission to use, copy, modify, distribute, and sell this software and its -# documentation for any purpose is hereby granted without fee, provided that -# the above copyright notice appear in all copies and that both that -# copyright notice and this permission notice appear in supporting -# documentation, and that the name of M.I.T. not be used in advertising or -# publicity pertaining to distribution of the software without specific, -# written prior permission. M.I.T. makes no representations about the -# suitability of this software for any purpose. It is provided "as is" -# without express or implied warranty. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. It can only install one file at a time, a restriction -# shared with many OS's install programs. - - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" - - -# put in absolute paths if you don't have them in your path; or use env. vars. - -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" -mkdirprog="${MKDIRPROG-mkdir}" - -transformbasename="" -transform_arg="" -instcmd="$mvprog" -chmodcmd="$chmodprog 0755" -chowncmd="" -chgrpcmd="" -stripcmd="" -rmcmd="$rmprog -f" -mvcmd="$mvprog" -src="" -dst="" -dir_arg="" - -while [ x"$1" != x ]; do - case $1 in - -c) instcmd="$cpprog" - shift - continue;; - - -d) dir_arg=true - shift - continue;; - - -m) chmodcmd="$chmodprog $2" - shift - shift - continue;; - - -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; - - -s) stripcmd="$stripprog" - shift - continue;; - - -t=*) transformarg=`echo $1 | sed 's/-t=//'` - shift - continue;; - - -b=*) transformbasename=`echo $1 | sed 's/-b=//'` - shift - continue;; - - *) if [ x"$src" = x ] - then - src=$1 - else - # this colon is to work around a 386BSD /bin/sh bug - : - dst=$1 - fi - shift - continue;; - esac -done - -if [ x"$src" = x ] -then - echo "install: no input file specified" - exit 1 -else - true -fi - -if [ x"$dir_arg" != x ]; then - dst=$src - src="" - - if [ -d $dst ]; then - instcmd=: - else - instcmd=mkdir - fi -else - -# Waiting for this to be detected by the "$instcmd $src $dsttmp" command -# might cause directories to be created, which would be especially bad -# if $src (and thus $dsttmp) contains '*'. - - if [ -f $src -o -d $src ] - then - true - else - echo "install: $src does not exist" - exit 1 - fi - - if [ x"$dst" = x ] - then - echo "install: no destination specified" - exit 1 - else - true - fi - -# If destination is a directory, append the input filename; if your system -# does not like double slashes in filenames, you may need to add some logic - - if [ -d $dst ] - then - dst="$dst"/`basename $src` - else - true - fi -fi - -## this sed command emulates the dirname command -dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` - -# Make sure that the destination directory exists. -# this part is taken from Noah Friedman's mkinstalldirs script - -# Skip lots of stat calls in the usual case. -if [ ! -d "$dstdir" ]; then -defaultIFS=' -' -IFS="${IFS-${defaultIFS}}" - -oIFS="${IFS}" -# Some sh's can't handle IFS=/ for some reason. -IFS='%' -set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` -IFS="${oIFS}" - -pathcomp='' - -while [ $# -ne 0 ] ; do - pathcomp="${pathcomp}${1}" - shift - - if [ ! -d "${pathcomp}" ] ; - then - $mkdirprog "${pathcomp}" - else - true - fi - - pathcomp="${pathcomp}/" -done -fi - -if [ x"$dir_arg" != x ] -then - $doit $instcmd $dst && - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi -else - -# If we're going to rename the final executable, determine the name now. - - if [ x"$transformarg" = x ] - then - dstfile=`basename $dst` - else - dstfile=`basename $dst $transformbasename | - sed $transformarg`$transformbasename - fi - -# don't allow the sed command to completely eliminate the filename - - if [ x"$dstfile" = x ] - then - dstfile=`basename $dst` - else - true - fi - -# Make a temp file name in the proper directory. - - dsttmp=$dstdir/#inst.$$# - -# Move or copy the file name to the temp name - - $doit $instcmd $src $dsttmp && - - trap "rm -f ${dsttmp}" 0 && - -# and set any options; do chmod last to preserve setuid bits - -# If any of these fail, we abort the whole thing. If we want to -# ignore errors from any of these, just make sure not to ignore -# errors from the above "$doit $instcmd $src $dsttmp" command. - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && - -# Now rename the file to the real destination. - - $doit $rmcmd -f $dstdir/$dstfile && - $doit $mvcmd $dsttmp $dstdir/$dstfile - -fi && - - -exit 0 diff --git a/ltconfig b/ltconfig deleted file mode 100755 index c14d83c..0000000 --- a/ltconfig +++ /dev/null @@ -1,3114 +0,0 @@ -#! /bin/sh - -# ltconfig - Create a system-specific libtool. -# Copyright (C) 1996-1999 Free Software Foundation, Inc. -# Originally by Gordon Matzigkeit , 1996 -# -# This file is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# A lot of this script is taken from autoconf-2.10. - -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} -echo=echo -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then - # Yippee, $echo works! - : -else - # Restart under the correct shell. - exec "$SHELL" "$0" --no-reexec ${1+"$@"} -fi - -if test "X$1" = X--fallback-echo; then - # used as fallback echo - shift - cat </dev/null`} - case X$UNAME in - *-DOS) PATH_SEPARATOR=';' ;; - *) PATH_SEPARATOR=':' ;; - esac -fi - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi - -if test "X${echo_test_string+set}" != Xset; then - # find a string as large as possible, as long as the shell can cope with it - for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do - # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... - if (echo_test_string="`eval $cmd`") 2>/dev/null && - echo_test_string="`eval $cmd`" && - (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null; then - break - fi - done -fi - -if test "X`($echo '\t') 2>/dev/null`" != 'X\t' || - test "X`($echo "$echo_test_string") 2>/dev/null`" != X"$echo_test_string"; then - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" - for dir in $PATH /usr/ucb; do - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - test "X`($dir/echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then - echo="$dir/echo" - break - fi - done - IFS="$save_ifs" - - if test "X$echo" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && - test "X`(print -r "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - echo='print -r' - elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running ltconfig again with it. - ORIGINAL_CONFIG_SHELL="${CONFIG_SHELL-/bin/sh}" - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" --no-reexec ${1+"$@"} - else - # Try using printf. - echo='printf "%s\n"' - if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - test "X`($echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then - # Cool, printf works - : - elif test "X`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null`" = 'X\t' && - test "X`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then - CONFIG_SHELL="$ORIGINAL_CONFIG_SHELL" - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - echo="$CONFIG_SHELL $0 --fallback-echo" - elif test "X`("$CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null`" = 'X\t' && - test "X`("$CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then - echo="$CONFIG_SHELL $0 --fallback-echo" - else - # maybe with a smaller string... - prev=: - - for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do - if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null; then - break - fi - prev="$cmd" - done - - if test "$prev" != 'sed 50q "$0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec "${ORIGINAL_CONFIG_SHELL}" "$0" ${1+"$@"} - else - # Oops. We lost completely, so just stick with echo. - echo=echo - fi - fi - fi - fi -fi - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e s/^X//' -sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# The name of this program. -progname=`$echo "X$0" | $Xsed -e 's%^.*/%%'` - -# Constants: -PROGRAM=ltconfig -PACKAGE=libtool -VERSION=1.3.5 -TIMESTAMP=" (1.385.2.206 2000/05/27 11:12:27)" -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -rm="rm -f" - -help="Try \`$progname --help' for more information." - -# Global variables: -default_ofile=libtool -can_build_shared=yes -enable_shared=yes -# All known linkers require a `.a' archive for static linking (except M$VC, -# which needs '.lib'). -enable_static=yes -enable_fast_install=yes -enable_dlopen=unknown -enable_win32_dll=no -ltmain= -silent= -srcdir= -ac_config_guess= -ac_config_sub= -host= -nonopt= -ofile="$default_ofile" -verify_host=yes -with_gcc=no -with_gnu_ld=no -need_locks=yes -ac_ext=c -objext=o -libext=a -exeext= -cache_file= - -old_AR="$AR" -old_CC="$CC" -old_CFLAGS="$CFLAGS" -old_CPPFLAGS="$CPPFLAGS" -old_LDFLAGS="$LDFLAGS" -old_LD="$LD" -old_LN_S="$LN_S" -old_LIBS="$LIBS" -old_NM="$NM" -old_RANLIB="$RANLIB" -old_DLLTOOL="$DLLTOOL" -old_OBJDUMP="$OBJDUMP" -old_AS="$AS" - -# Parse the command line options. -args= -prev= -for option -do - case "$option" in - -*=*) optarg=`echo "$option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; - *) optarg= ;; - esac - - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - eval "$prev=\$option" - prev= - continue - fi - - case "$option" in - --help) cat <&2 - echo "$help" 1>&2 - exit 1 - ;; - - *) - if test -z "$ltmain"; then - ltmain="$option" - elif test -z "$host"; then -# This generates an unnecessary warning for sparc-sun-solaris4.1.3_U1 -# if test -n "`echo $option| sed 's/[-a-z0-9.]//g'`"; then -# echo "$progname: warning \`$option' is not a valid host type" 1>&2 -# fi - host="$option" - else - echo "$progname: too many arguments" 1>&2 - echo "$help" 1>&2 - exit 1 - fi ;; - esac -done - -if test -z "$ltmain"; then - echo "$progname: you must specify a LTMAIN file" 1>&2 - echo "$help" 1>&2 - exit 1 -fi - -if test ! -f "$ltmain"; then - echo "$progname: \`$ltmain' does not exist" 1>&2 - echo "$help" 1>&2 - exit 1 -fi - -# Quote any args containing shell metacharacters. -ltconfig_args= -for arg -do - case "$arg" in - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) - ltconfig_args="$ltconfig_args '$arg'" ;; - *) ltconfig_args="$ltconfig_args $arg" ;; - esac -done - -# A relevant subset of AC_INIT. - -# File descriptor usage: -# 0 standard input -# 1 file creation -# 2 errors and warnings -# 3 some systems may open it to /dev/tty -# 4 used on the Kubota Titan -# 5 compiler messages saved in config.log -# 6 checking for... messages and results -if test "$silent" = yes; then - exec 6>/dev/null -else - exec 6>&1 -fi -exec 5>>./config.log - -# NLS nuisances. -# Only set LANG and LC_ALL to C if already set. -# These must not be set unconditionally because not all systems understand -# e.g. LANG=C (notably SCO). -if test "X${LC_ALL+set}" = Xset; then LC_ALL=C; export LC_ALL; fi -if test "X${LANG+set}" = Xset; then LANG=C; export LANG; fi - -if test -n "$cache_file" && test -r "$cache_file"; then - echo "loading cache $cache_file within ltconfig" - . $cache_file -fi - -if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then - # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. - if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then - ac_n= ac_c=' -' ac_t=' ' - else - ac_n=-n ac_c= ac_t= - fi -else - ac_n= ac_c='\c' ac_t= -fi - -if test -z "$srcdir"; then - # Assume the source directory is the same one as the path to LTMAIN. - srcdir=`$echo "X$ltmain" | $Xsed -e 's%/[^/]*$%%'` - test "$srcdir" = "$ltmain" && srcdir=. -fi - -trap "$rm conftest*; exit 1" 1 2 15 -if test "$verify_host" = yes; then - # Check for config.guess and config.sub. - ac_aux_dir= - for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do - if test -f $ac_dir/config.guess; then - ac_aux_dir=$ac_dir - break - fi - done - if test -z "$ac_aux_dir"; then - echo "$progname: cannot find config.guess in $srcdir $srcdir/.. $srcdir/../.." 1>&2 - echo "$help" 1>&2 - exit 1 - fi - ac_config_guess=$ac_aux_dir/config.guess - ac_config_sub=$ac_aux_dir/config.sub - - # Make sure we can run config.sub. - if $SHELL $ac_config_sub sun4 >/dev/null 2>&1; then : - else - echo "$progname: cannot run $ac_config_sub" 1>&2 - echo "$help" 1>&2 - exit 1 - fi - - echo $ac_n "checking host system type""... $ac_c" 1>&6 - - host_alias=$host - case "$host_alias" in - "") - if host_alias=`$SHELL $ac_config_guess`; then : - else - echo "$progname: cannot guess host type; you must specify one" 1>&2 - echo "$help" 1>&2 - exit 1 - fi ;; - esac - host=`$SHELL $ac_config_sub $host_alias` - echo "$ac_t$host" 1>&6 - - # Make sure the host verified. - test -z "$host" && exit 1 - -elif test -z "$host"; then - echo "$progname: you must specify a host type if you use \`--no-verify'" 1>&2 - echo "$help" 1>&2 - exit 1 -else - host_alias=$host -fi - -# Transform linux* to *-*-linux-gnu*, to support old configure scripts. -case "$host_os" in -linux-gnu*) ;; -linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` -esac - -host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` - -case "$host_os" in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR cru $oldlib$oldobjs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -# Set a sane default for `AR'. -test -z "$AR" && AR=ar - -# Set a sane default for `OBJDUMP'. -test -z "$OBJDUMP" && OBJDUMP=objdump - -# If RANLIB is not set, then run the test. -if test "${RANLIB+set}" != "set"; then - result=no - - echo $ac_n "checking for ranlib... $ac_c" 1>&6 - IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" - for dir in $PATH; do - test -z "$dir" && dir=. - if test -f $dir/ranlib || test -f $dir/ranlib$ac_exeext; then - RANLIB="ranlib" - result="ranlib" - break - fi - done - IFS="$save_ifs" - - echo "$ac_t$result" 1>&6 -fi - -if test -n "$RANLIB"; then - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" - old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" -fi - -# Set sane defaults for `DLLTOOL', `OBJDUMP', and `AS', used on cygwin. -test -z "$DLLTOOL" && DLLTOOL=dlltool -test -z "$OBJDUMP" && OBJDUMP=objdump -test -z "$AS" && AS=as - -# Check to see if we are using GCC. -if test "$with_gcc" != yes || test -z "$CC"; then - # If CC is not set, then try to find GCC or a usable CC. - if test -z "$CC"; then - echo $ac_n "checking for gcc... $ac_c" 1>&6 - IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" - for dir in $PATH; do - test -z "$dir" && dir=. - if test -f $dir/gcc || test -f $dir/gcc$ac_exeext; then - CC="gcc" - break - fi - done - IFS="$save_ifs" - - if test -n "$CC"; then - echo "$ac_t$CC" 1>&6 - else - echo "$ac_t"no 1>&6 - fi - fi - - # Not "gcc", so try "cc", rejecting "/usr/ucb/cc". - if test -z "$CC"; then - echo $ac_n "checking for cc... $ac_c" 1>&6 - IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" - cc_rejected=no - for dir in $PATH; do - test -z "$dir" && dir=. - if test -f $dir/cc || test -f $dir/cc$ac_exeext; then - if test "$dir/cc" = "/usr/ucb/cc"; then - cc_rejected=yes - continue - fi - CC="cc" - break - fi - done - IFS="$save_ifs" - if test $cc_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $CC - shift - if test $# -gt 0; then - # We chose a different compiler from the bogus one. - # However, it has the same name, so the bogon will be chosen - # first if we set CC to just the name; use the full file name. - shift - set dummy "$dir/cc" "$@" - shift - CC="$@" - fi - fi - - if test -n "$CC"; then - echo "$ac_t$CC" 1>&6 - else - echo "$ac_t"no 1>&6 - fi - - if test -z "$CC"; then - echo "$progname: error: no acceptable cc found in \$PATH" 1>&2 - exit 1 - fi - fi - - # Now see if the compiler is really GCC. - with_gcc=no - echo $ac_n "checking whether we are using GNU C... $ac_c" 1>&6 - echo "$progname:581: checking whether we are using GNU C" >&5 - - $rm conftest.c - cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then - with_gcc=yes - fi - $rm conftest.c - echo "$ac_t$with_gcc" 1>&6 -fi - -# Allow CC to be a program name with arguments. -set dummy $CC -compiler="$2" - -echo $ac_n "checking for object suffix... $ac_c" 1>&6 -$rm conftest* -echo 'int i = 1;' > conftest.c -echo "$progname:603: checking for object suffix" >& 5 -if { (eval echo $progname:604: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; }; then - # Append any warnings to the config.log. - cat conftest.err 1>&5 - - for ac_file in conftest.*; do - case $ac_file in - *.c) ;; - *) objext=`echo $ac_file | sed -e s/conftest.//` ;; - esac - done -else - cat conftest.err 1>&5 - echo "$progname: failed program was:" >&5 - cat conftest.c >&5 -fi -$rm conftest* -echo "$ac_t$objext" 1>&6 - -echo $ac_n "checking for executable suffix... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_cv_exeext="no" - $rm conftest* - echo 'main () { return 0; }' > conftest.c - echo "$progname:629: checking for executable suffix" >& 5 - if { (eval echo $progname:630: \"$ac_link\") 1>&5; (eval $ac_link) 2>conftest.err; }; then - # Append any warnings to the config.log. - cat conftest.err 1>&5 - - for ac_file in conftest.*; do - case $ac_file in - *.c | *.err | *.$objext ) ;; - *) ac_cv_exeext=.`echo $ac_file | sed -e s/conftest.//` ;; - esac - done - else - cat conftest.err 1>&5 - echo "$progname: failed program was:" >&5 - cat conftest.c >&5 - fi - $rm conftest* -fi -if test "X$ac_cv_exeext" = Xno; then - exeext="" -else - exeext="$ac_cv_exeext" -fi -echo "$ac_t$ac_cv_exeext" 1>&6 - -echo $ac_n "checking for $compiler option to produce PIC... $ac_c" 1>&6 -pic_flag= -special_shlib_compile_flags= -wl= -link_static_flag= -no_builtin_flag= - -if test "$with_gcc" = yes; then - wl='-Wl,' - link_static_flag='-static' - - case "$host_os" in - beos* | irix5* | irix6* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - aix*) - # Below there is a dirty hack to force normal static linking with -ldl - # The problem is because libdl dynamically linked with both libc and - # libC (AIX C++ library), which obviously doesn't included in libraries - # list by gcc. This cause undefined symbols with -static flags. - # This hack allows C programs to be linked with "-static -ldl", but - # we not sure about C++ programs. - link_static_flag="$link_static_flag ${wl}-lC" - ;; - cygwin* | mingw* | os2*) - # We can build DLLs from non-PIC. - ;; - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - pic_flag='-m68020 -resident32 -malways-restore-a4' - ;; - sysv4*MP*) - if test -d /usr/nec; then - pic_flag=-Kconform_pic - fi - ;; - *) - pic_flag='-fPIC' - ;; - esac -else - # PORTME Check for PIC flags for the system compiler. - case "$host_os" in - aix3* | aix4*) - # All AIX code is PIC. - link_static_flag='-bnso -bI:/lib/syscalls.exp' - ;; - - hpux9* | hpux10* | hpux11*) - # Is there a better link_static_flag that works with the bundled CC? - wl='-Wl,' - link_static_flag="${wl}-a ${wl}archive" - pic_flag='+Z' - ;; - - irix5* | irix6*) - wl='-Wl,' - link_static_flag='-non_shared' - # PIC (with -KPIC) is the default. - ;; - - cygwin* | mingw* | os2*) - # We can build DLLs from non-PIC. - ;; - - osf3* | osf4* | osf5*) - # All OSF/1 code is PIC. - wl='-Wl,' - link_static_flag='-non_shared' - ;; - - sco3.2v5*) - pic_flag='-Kpic' - link_static_flag='-dn' - special_shlib_compile_flags='-belf' - ;; - - solaris*) - pic_flag='-KPIC' - link_static_flag='-Bstatic' - wl='-Wl,' - ;; - - sunos4*) - pic_flag='-PIC' - link_static_flag='-Bstatic' - wl='-Qoption ld ' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - pic_flag='-KPIC' - link_static_flag='-Bstatic' - wl='-Wl,' - ;; - - uts4*) - pic_flag='-pic' - link_static_flag='-Bstatic' - ;; - sysv4*MP*) - if test -d /usr/nec ;then - pic_flag='-Kconform_pic' - link_static_flag='-Bstatic' - fi - ;; - *) - can_build_shared=no - ;; - esac -fi - -if test -n "$pic_flag"; then - echo "$ac_t$pic_flag" 1>&6 - - # Check to make sure the pic_flag actually works. - echo $ac_n "checking if $compiler PIC flag $pic_flag works... $ac_c" 1>&6 - $rm conftest* - echo "int some_variable = 0;" > conftest.c - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS $pic_flag -DPIC" - echo "$progname:776: checking if $compiler PIC flag $pic_flag works" >&5 - if { (eval echo $progname:777: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then - # Append any warnings to the config.log. - cat conftest.err 1>&5 - - case "$host_os" in - hpux9* | hpux10* | hpux11*) - # On HP-UX, both CC and GCC only warn that PIC is supported... then they - # create non-PIC objects. So, if there were any warnings, we assume that - # PIC is not supported. - if test -s conftest.err; then - echo "$ac_t"no 1>&6 - can_build_shared=no - pic_flag= - else - echo "$ac_t"yes 1>&6 - pic_flag=" $pic_flag" - fi - ;; - *) - echo "$ac_t"yes 1>&6 - pic_flag=" $pic_flag" - ;; - esac - else - # Append any errors to the config.log. - cat conftest.err 1>&5 - can_build_shared=no - pic_flag= - echo "$ac_t"no 1>&6 - fi - CFLAGS="$save_CFLAGS" - $rm conftest* -else - echo "$ac_t"none 1>&6 -fi - -# Check to see if options -o and -c are simultaneously supported by compiler -echo $ac_n "checking if $compiler supports -c -o file.o... $ac_c" 1>&6 -$rm -r conftest 2>/dev/null -mkdir conftest -cd conftest -$rm conftest* -echo "int some_variable = 0;" > conftest.c -mkdir out -# According to Tom Tromey, Ian Lance Taylor reported there are C compilers -# that will create temporary files in the current directory regardless of -# the output directory. Thus, making CWD read-only will cause this test -# to fail, enabling locking or at least warning the user not to do parallel -# builds. -chmod -w . -save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS -o out/conftest2.o" -echo "$progname:829: checking if $compiler supports -c -o file.o" >&5 -if { (eval echo $progname:830: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.o; then - - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s out/conftest.err; then - echo "$ac_t"no 1>&6 - compiler_c_o=no - else - echo "$ac_t"yes 1>&6 - compiler_c_o=yes - fi -else - # Append any errors to the config.log. - cat out/conftest.err 1>&5 - compiler_c_o=no - echo "$ac_t"no 1>&6 -fi -CFLAGS="$save_CFLAGS" -chmod u+w . -$rm conftest* out/* -rmdir out -cd .. -rmdir conftest -$rm -r conftest 2>/dev/null - -if test x"$compiler_c_o" = x"yes"; then - # Check to see if we can write to a .lo - echo $ac_n "checking if $compiler supports -c -o file.lo... $ac_c" 1>&6 - $rm conftest* - echo "int some_variable = 0;" > conftest.c - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -c -o conftest.lo" - echo "$progname:862: checking if $compiler supports -c -o file.lo" >&5 -if { (eval echo $progname:863: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.lo; then - - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - echo "$ac_t"no 1>&6 - compiler_o_lo=no - else - echo "$ac_t"yes 1>&6 - compiler_o_lo=yes - fi - else - # Append any errors to the config.log. - cat conftest.err 1>&5 - compiler_o_lo=no - echo "$ac_t"no 1>&6 - fi - CFLAGS="$save_CFLAGS" - $rm conftest* -else - compiler_o_lo=no -fi - -# Check to see if we can do hard links to lock some files if needed -hard_links="nottested" -if test "$compiler_c_o" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - echo $ac_n "checking if we can lock with hard links... $ac_c" 1>&6 - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - echo "$ac_t$hard_links" 1>&6 - $rm conftest* - if test "$hard_links" = no; then - echo "*** WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2 - need_locks=warn - fi -else - need_locks=no -fi - -if test "$with_gcc" = yes; then - # Check to see if options -fno-rtti -fno-exceptions are supported by compiler - echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions ... $ac_c" 1>&6 - $rm conftest* - echo "int some_variable = 0;" > conftest.c - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.c" - echo "$progname:914: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 - if { (eval echo $progname:915: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.o; then - - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - echo "$ac_t"no 1>&6 - compiler_rtti_exceptions=no - else - echo "$ac_t"yes 1>&6 - compiler_rtti_exceptions=yes - fi - else - # Append any errors to the config.log. - cat conftest.err 1>&5 - compiler_rtti_exceptions=no - echo "$ac_t"no 1>&6 - fi - CFLAGS="$save_CFLAGS" - $rm conftest* - - if test "$compiler_rtti_exceptions" = "yes"; then - no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions' - else - no_builtin_flag=' -fno-builtin' - fi - -fi - -# Check for any special shared library compilation flags. -if test -n "$special_shlib_compile_flags"; then - echo "$progname: warning: \`$CC' requires \`$special_shlib_compile_flags' to build shared libraries" 1>&2 - if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$special_shlib_compile_flags[ ]" >/dev/null; then : - else - echo "$progname: add \`$special_shlib_compile_flags' to the CC or CFLAGS env variable and reconfigure" 1>&2 - can_build_shared=no - fi -fi - -echo $ac_n "checking if $compiler static flag $link_static_flag works... $ac_c" 1>&6 -$rm conftest* -echo 'main(){return(0);}' > conftest.c -save_LDFLAGS="$LDFLAGS" -LDFLAGS="$LDFLAGS $link_static_flag" -echo "$progname:958: checking if $compiler static flag $link_static_flag works" >&5 -if { (eval echo $progname:959: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then - echo "$ac_t$link_static_flag" 1>&6 -else - echo "$ac_t"none 1>&6 - link_static_flag= -fi -LDFLAGS="$save_LDFLAGS" -$rm conftest* - -if test -z "$LN_S"; then - # Check to see if we can use ln -s, or we need hard links. - echo $ac_n "checking whether ln -s works... $ac_c" 1>&6 - $rm conftest.dat - if ln -s X conftest.dat 2>/dev/null; then - $rm conftest.dat - LN_S="ln -s" - else - LN_S=ln - fi - if test "$LN_S" = "ln -s"; then - echo "$ac_t"yes 1>&6 - else - echo "$ac_t"no 1>&6 - fi -fi - -# Make sure LD is an absolute path. -if test -z "$LD"; then - ac_prog=ld - if test "$with_gcc" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - echo $ac_n "checking for ld used by GCC... $ac_c" 1>&6 - echo "$progname:991: checking for ld used by GCC" >&5 - ac_prog=`($CC -print-prog-name=ld) 2>&5` - case "$ac_prog" in - # Accept absolute paths. - [\\/]* | [A-Za-z]:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we are not using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac - elif test "$with_gnu_ld" = yes; then - echo $ac_n "checking for GNU ld... $ac_c" 1>&6 - echo "$progname:1015: checking for GNU ld" >&5 - else - echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6 - echo "$progname:1018: checking for non-GNU ld" >&5 - fi - - if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - if "$LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then - test "$with_gnu_ld" != no && break - else - test "$with_gnu_ld" != yes && break - fi - fi - done - IFS="$ac_save_ifs" - fi - - if test -n "$LD"; then - echo "$ac_t$LD" 1>&6 - else - echo "$ac_t"no 1>&6 - fi - - if test -z "$LD"; then - echo "$progname: error: no acceptable ld found in \$PATH" 1>&2 - exit 1 - fi -fi - -# Check to see if it really is or is not GNU ld. -echo $ac_n "checking if the linker ($LD) is GNU ld... $ac_c" 1>&6 -# I'd rather use --version here, but apparently some GNU ld's only accept -v. -if $LD -v 2>&1 &5; then - with_gnu_ld=yes -else - with_gnu_ld=no -fi -echo "$ac_t$with_gnu_ld" 1>&6 - -# See if the linker supports building shared libraries. -echo $ac_n "checking whether the linker ($LD) supports shared libraries... $ac_c" 1>&6 - -allow_undefined_flag= -no_undefined_flag= -need_lib_prefix=unknown -need_version=unknown -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -archive_cmds= -archive_expsym_cmds= -old_archive_from_new_cmds= -export_dynamic_flag_spec= -whole_archive_flag_spec= -thread_safe_flag_spec= -hardcode_libdir_flag_spec= -hardcode_libdir_separator= -hardcode_direct=no -hardcode_minus_L=no -hardcode_shlibpath_var=unsupported -runpath_var= -always_export_symbols=no -export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' -# include_expsyms should be a list of space-separated symbols to be *always* -# included in the symbol list -include_expsyms= -# exclude_expsyms can be an egrep regular expression of symbols to exclude -# it will be wrapped by ` (' and `)$', so one must not match beginning or -# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', -# as well as any symbol that contains `d'. -exclude_expsyms="_GLOBAL_OFFSET_TABLE_" -# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out -# platforms (ab)use it in PIC code, but their linkers get confused if -# the symbol is explicitly referenced. Since portable code cannot -# rely on this symbol name, it's probably fine to never include it in -# preloaded symbol tables. - -case "$host_os" in -cygwin* | mingw*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$with_gcc" != yes; then - with_gnu_ld=no - fi - ;; - -esac - -ld_shlibs=yes -if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # See if GNU ld supports shared libraries. - case "$host_os" in - aix3* | aix4*) - # On AIX, the GNU linker is very broken - ld_shlibs=no - cat <&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. - -EOF - ;; - - amigaos*) - archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can use - # them. - ld_shlibs=no - ;; - - beos*) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs=no - fi - ;; - - cygwin* | mingw*) - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - allow_undefined_flag=unsupported - always_export_symbols=yes - - # Extract the symbol export list from an `--export-all' def file, - # then regenerate the def file from the symbol export list, so that - # the compiled dll only exports the symbol export list. - # Be careful not to strip the DATA tag left by newer dlltools. - export_symbols_cmds='test -f $objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~ - test -f $objdir/$soname-ltdll.$objext || (cd $objdir && $CC -c $soname-ltdll.c)~ - $DLLTOOL --export-all --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --output-def $objdir/$soname-def $objdir/$soname-ltdll.$objext $libobjs $convenience~ - sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $objdir/$soname-def > $export_symbols' - - # If DATA tags from a recent dlltool are present, honour them! - archive_expsym_cmds='echo EXPORTS > $objdir/$soname-def~ - _lt_hint=1; - cat $export_symbols | while read symbol; do - set dummy \$symbol; - case \$# in - 2) echo " \$2 @ \$_lt_hint ; " >> $objdir/$soname-def;; - *) echo " \$2 @ \$_lt_hint \$3 ; " >> $objdir/$soname-def;; - esac; - _lt_hint=`expr 1 + \$_lt_hint`; - done~ - test -f $objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~ - test -f $objdir/$soname-ltdll.$objext || (cd $objdir && $CC -c $soname-ltdll.c)~ - $CC -Wl,--base-file,$objdir/$soname-base -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --def $objdir/$soname-def --base-file $objdir/$soname-base --output-exp $objdir/$soname-exp~ - $CC -Wl,--base-file,$objdir/$soname-base $objdir/$soname-exp -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --def $objdir/$soname-def --base-file $objdir/$soname-base --output-exp $objdir/$soname-exp~ - $CC $objdir/$soname-exp -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts' - - old_archive_from_new_cmds='$DLLTOOL --as=$AS --dllname $soname --def $objdir/$soname-def --output-lib $objdir/$libname.a' - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - archive_cmds='$LD -Bshareable $libobjs $deplibs $linkopts -o $lib' - # can we support soname and/or expsyms with a.out? -oliva - fi - ;; - - solaris* | sysv5*) - if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - cat <&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -EOF - elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - - sunos4*) - archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linkopts' - wlarc= - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - *) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - - if test "$ld_shlibs" = yes; then - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec='${wl}--export-dynamic' - case $host_os in - cygwin* | mingw*) - # dlltool doesn't understand --whole-archive et. al. - whole_archive_flag_spec= - ;; - *) - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec= - fi - ;; - esac - fi -else - # PORTME fill in a description of your system's linker (not GNU ld) - case "$host_os" in - aix3*) - allow_undefined_flag=unsupported - always_export_symbols=yes - archive_expsym_cmds='$LD -o $objdir/$soname $libobjs $deplibs $linkopts -bE:$export_symbols -T512 -H512 -bM:SRE~$AR cru $lib $objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$with_gcc" = yes && test -z "$link_static_flag"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - - aix4*) - hardcode_libdir_flag_spec='${wl}-b ${wl}nolibpath ${wl}-b ${wl}libpath:$libdir:/usr/lib:/lib' - hardcode_libdir_separator=':' - if test "$with_gcc" = yes; then - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - hardcode_direct=yes - else - # We have old collect2 - hardcode_direct=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - shared_flag='-shared' - else - shared_flag='${wl}-bM:SRE' - hardcode_direct=yes - fi - allow_undefined_flag=' ${wl}-berok' - archive_cmds="\$CC $shared_flag"' -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bexpall ${wl}-bnoentry${allow_undefined_flag}' - archive_expsym_cmds="\$CC $shared_flag"' -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}' - case "$host_os" in aix4.[01]|aix4.[01].*) - # According to Greg Wooledge, -bexpall is only supported from AIX 4.2 on - always_export_symbols=yes ;; - esac - ;; - - amigaos*) - archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - # see comment about different semantics on the GNU ld section - ld_shlibs=no - ;; - - cygwin* | mingw*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $linkopts `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_from_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib /OUT:$oldlib$oldobjs' - fix_srcfile_path='`cygpath -w $srcfile`' - ;; - - freebsd1*) - ld_shlibs=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd*) - archive_cmds='$CC -shared -o $lib $libobjs $deplibs $linkopts' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - hpux9* | hpux10* | hpux11*) - case "$host_os" in - hpux9*) archive_cmds='$rm $objdir/$soname~$LD -b +b $install_libdir -o $objdir/$soname $libobjs $deplibs $linkopts~test $objdir/$soname = $lib || mv $objdir/$soname $lib' ;; - *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linkopts' ;; - esac - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - hardcode_minus_L=yes # Not in the search PATH, but as the default - # location of the library. - export_dynamic_flag_spec='${wl}-E' - ;; - - irix5* | irix6*) - if test "$with_gcc" = yes; then - archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' - else - archive_cmds='$LD -shared $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts' # a.out - else - archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linkopts' # ELF - fi - hardcode_libdir_flag_spec='${wl}-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - openbsd*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $objdir/$libname.def~$echo DATA >> $objdir/$libname.def~$echo " SINGLE NONSHARED" >> $objdir/$libname.def~$echo EXPORTS >> $objdir/$libname.def~emxexp $libobjs >> $objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $linkopts $objdir/$libname.def' - old_archive_from_new_cmds='emximp -o $objdir/$libname.a $objdir/$libname.def' - ;; - - osf3*) - if test "$with_gcc" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - - osf4* | osf5*) # As osf3* with the addition of the -msym flag - if test "$with_gcc" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $linkopts ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linkopts -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - rhapsody*) - archive_cmds='$CC -bundle -undefined suppress -o $lib $libobjs $deplibs $linkopts' - hardcode_libdir_flags_spec='-L$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - sco3.2v5*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ;; - - solaris*) - no_undefined_flag=' -z text' - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linkopts' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linkopts~$rm $lib.exp' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_shlibpath_var=no - case "$host_os" in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) # Supported since Solaris 2.6 (maybe 2.5.1?) - whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; - esac - ;; - - sunos4*) - archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linkopts' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - sysv4) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $linkopts' - else - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts' - fi - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - ;; - - sysv4.3*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts' - hardcode_shlibpath_var=no - export_dynamic_flag_spec='-Bexport' - ;; - - sysv5*) - no_undefined_flag=' -z text' - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linkopts' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linkopts~$rm $lib.exp' - hardcode_libdir_flag_spec= - hardcode_shlibpath_var=no - runpath_var='LD_RUN_PATH' - ;; - - uts4*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - dgux*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs=yes - fi - ;; - - sysv4.2uw2*) - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linkopts' - hardcode_direct=yes - hardcode_minus_L=no - hardcode_shlibpath_var=no - hardcode_runpath_var=yes - runpath_var=LD_RUN_PATH - ;; - - unixware7*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts' - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - - *) - ld_shlibs=no - ;; - esac -fi -echo "$ac_t$ld_shlibs" 1>&6 -test "$ld_shlibs" = no && can_build_shared=no - -if test -z "$NM"; then - echo $ac_n "checking for BSD-compatible nm... $ac_c" 1>&6 - case "$NM" in - [\\/]* | [A-Za-z]:[\\/]*) ;; # Let the user override the test with a path. - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" - for ac_dir in $PATH /usr/ucb /usr/ccs/bin /bin; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - NM="$ac_dir/nm -B" - break - elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - NM="$ac_dir/nm -p" - break - else - NM=${NM="$ac_dir/nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - fi - fi - done - IFS="$ac_save_ifs" - test -z "$NM" && NM=nm - ;; - esac - echo "$ac_t$NM" 1>&6 -fi - -# Check for command to grab the raw symbol name followed by C symbol from nm. -echo $ac_n "checking command to parse $NM output... $ac_c" 1>&6 - -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[BCDEGRST]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([_A-Za-z][_A-Za-z0-9]*\)' - -# Transform the above into a raw symbol and a C symbol. -symxfrm='\1 \2\3 \3' - -# Transform an extracted symbol line into a proper C declaration -global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" - -# Define system-specific variables. -case "$host_os" in -aix*) - symcode='[BCDT]' - ;; -cygwin* | mingw*) - symcode='[ABCDGISTW]' - ;; -hpux*) # Its linker distinguishes data from code symbols - global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'" - ;; -irix*) - symcode='[BCDEGRST]' - ;; -solaris*) - symcode='[BDT]' - ;; -sysv4) - symcode='[DFNSTU]' - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then - symcode='[ABCDGISTW]' -fi - -# Try without a prefix undercore, then with it. -for ac_symprfx in "" "_"; do - - # Write the raw and C identifiers. - global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode\)[ ][ ]*\($ac_symprfx\)$sympat$/$symxfrm/p'" - - # Check to see that the pipe works correctly. - pipe_works=no - $rm conftest* - cat > conftest.c <&5 - if { (eval echo $progname:1654: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.$objext; then - # Now try to grab the symbols. - nlist=conftest.nm - if { echo "$progname:1657: eval \"$NM conftest.$objext | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.$objext | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then - - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if egrep ' nm_test_var$' "$nlist" >/dev/null; then - if egrep ' nm_test_func$' "$nlist" >/dev/null; then - cat < conftest.c -#ifdef __cplusplus -extern "C" { -#endif - -EOF - # Now generate the symbol file. - eval "$global_symbol_to_cdecl"' < "$nlist" >> conftest.c' - - cat <> conftest.c -#if defined (__STDC__) && __STDC__ -# define lt_ptr_t void * -#else -# define lt_ptr_t char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr_t address; -} -lt_preloaded_symbols[] = -{ -EOF - sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$nlist" >> conftest.c - cat <<\EOF >> conftest.c - {0, (lt_ptr_t) 0} -}; - -#ifdef __cplusplus -} -#endif -EOF - # Now try linking the two files. - mv conftest.$objext conftstm.$objext - save_LIBS="$LIBS" - save_CFLAGS="$CFLAGS" - LIBS="conftstm.$objext" - CFLAGS="$CFLAGS$no_builtin_flag" - if { (eval echo $progname:1709: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then - pipe_works=yes - else - echo "$progname: failed program was:" >&5 - cat conftest.c >&5 - fi - LIBS="$save_LIBS" - else - echo "cannot find nm_test_func in $nlist" >&5 - fi - else - echo "cannot find nm_test_var in $nlist" >&5 - fi - else - echo "cannot run $global_symbol_pipe" >&5 - fi - else - echo "$progname: failed program was:" >&5 - cat conftest.c >&5 - fi - $rm conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - global_symbol_pipe= - fi -done -if test "$pipe_works" = yes; then - echo "${ac_t}ok" 1>&6 -else - echo "${ac_t}failed" 1>&6 -fi - -if test -z "$global_symbol_pipe"; then - global_symbol_to_cdecl= -fi - -# Check hardcoding attributes. -echo $ac_n "checking how to hardcode library paths into programs... $ac_c" 1>&6 -hardcode_action= -if test -n "$hardcode_libdir_flag_spec" || \ - test -n "$runpath_var"; then - - # We can hardcode non-existant directories. - if test "$hardcode_direct" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$hardcode_shlibpath_var" != no && - test "$hardcode_minus_L" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action=unsupported -fi -echo "$ac_t$hardcode_action" 1>&6 - - -reload_flag= -reload_cmds='$LD$reload_flag -o $output$reload_objs' -echo $ac_n "checking for $LD option to reload object files... $ac_c" 1>&6 -# PORTME Some linkers may need a different reload flag. -reload_flag='-r' -echo "$ac_t$reload_flag" 1>&6 -test -n "$reload_flag" && reload_flag=" $reload_flag" - -# PORTME Fill in your ld.so characteristics -library_names_spec= -libname_spec='lib$name' -soname_spec= -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -file_magic_cmd= -file_magic_test_file= -deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [regex]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given egrep regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. -echo $ac_n "checking dynamic linker characteristics... $ac_c" 1>&6 -case "$host_os" in -aix3*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}.so$major' - ;; - -aix4*) - version_type=linux - # AIX has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - # We preserve .a as extension for shared libraries though AIX4.2 - # and later linker supports .so - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.a' - shlibpath_var=LIBPATH - deplibs_check_method=pass_all - ;; - -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' - ;; - -beos*) - library_names_spec='${libname}.so' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - deplibs_check_method=pass_all - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - -bsdi4*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' - file_magic_cmd=/usr/bin/file - file_magic_test_file=/shlib/libc.so - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - export_dynamic_flag_spec=-rdynamic - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw*) - version_type=windows - need_version=no - need_lib_prefix=no - if test "$with_gcc" = yes; then - library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.a' - else - library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib' - fi - dynamic_linker='Win32 ld.exe' - deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' - file_magic_cmd='${OBJDUMP} -f' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - -freebsd1*) - dynamic_linker=no - ;; - -freebsd*) - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` - version_type=freebsd-$objformat - case "$version_type" in - freebsd-elf*) - deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object' - file_magic_cmd=/usr/bin/file - file_magic_test_file=`echo /usr/lib/libc.so*` - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - deplibs_check_method=unknown - library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case "$host_os" in - freebsd2* | freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - ;; - *) # from 3.2 on - shlibpath_overrides_runpath=no - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - dynamic_linker="$host_os dld.sl" - version_type=sunos - need_lib_prefix=no - need_version=no - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' - soname_spec='${libname}${release}.sl$major' - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - case "$host_os" in - hpux10.20*) - # TODO: Does this work for hpux-11 too? - deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' - file_magic_cmd=/usr/bin/file - file_magic_test_file=/usr/lib/libc.sl - ;; - esac - ;; - -irix5* | irix6*) - version_type=irix - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}.so.$major' - library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major ${libname}${release}.so $libname.so' - case "$host_os" in - irix5*) - libsuff= shlibsuff= - # this will be overridden with pass_all, but let us keep it just in case - deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" - ;; - *) - case "$LD" in # libtool.m4 will add one of these switches to LD - *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - file_magic_cmd=/usr/bin/file - file_magic_test_file=`echo /lib${libsuff}/libc.so*` - deplibs_check_method='pass_all' - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux-gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - deplibs_check_method=pass_all - - if test -f /lib/ld.so.1; then - dynamic_linker='GNU ld.so' - else - # Only the GNU ld.so supports shared libraries on MkLinux. - case "$host_cpu" in - powerpc*) dynamic_linker=no ;; - *) dynamic_linker='Linux ld.so' ;; - esac - fi - ;; - -netbsd*) - version_type=sunos - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' - soname_spec='${libname}${release}.so$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - ;; - -openbsd*) - version_type=sunos - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - need_version=no - fi - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - ;; - -os2*) - libname_spec='$name' - need_lib_prefix=no - library_names_spec='$libname.dll $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_version=no - soname_spec='${libname}${release}.so' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - shlibpath_var=LD_LIBRARY_PATH - # this will be overridden with pass_all, but let us keep it just in case - deplibs_check_method='file_magic COFF format alpha shared library' - file_magic_cmd=/usr/bin/file - file_magic_test_file=/shlib/libc.so - deplibs_check_method='pass_all' - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -rhapsody*) - version_type=sunos - library_names_spec='${libname}.so' - soname_spec='${libname}.so' - shlibpath_var=DYLD_LIBRARY_PATH - deplibs_check_method=pass_all - ;; - -sco3.2v5*) - version_type=osf - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - deplibs_check_method="file_magic ELF [0-9][0-9]-bit [LM]SB dynamic lib" - file_magic_cmd=/usr/bin/file - file_magic_test_file=/lib/libc.so - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - case "$host_vendor" in - sequent) - file_magic_cmd='/bin/file' - deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' - ;; - ncr) - deplibs_check_method='pass_all' - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' - file_magic_cmd=/usr/bin/file - file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - esac - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' - soname_spec='$libname.so.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -*) - dynamic_linker=no - ;; -esac -echo "$ac_t$dynamic_linker" 1>&6 -test "$dynamic_linker" = no && can_build_shared=no - -# Report the final consequences. -echo "checking if libtool supports shared libraries... $can_build_shared" 1>&6 - -# Only try to build win32 dlls if AC_LIBTOOL_WIN32_DLL was used in -# configure.in, otherwise build static only libraries. -case "$host_os" in -cygwin* | mingw* | os2*) - if test x$can_build_shared = xyes; then - test x$enable_win32_dll = xno && can_build_shared=no - echo "checking if package supports dlls... $can_build_shared" 1>&6 - fi -;; -esac - -if test -n "$file_magic_test_file" && test -n "$file_magic_cmd"; then - case "$deplibs_check_method" in - "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - egrep "$file_magic_regex" > /dev/null; then - : - else - cat <&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac -fi - -echo $ac_n "checking whether to build shared libraries... $ac_c" 1>&6 -test "$can_build_shared" = "no" && enable_shared=no - -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case "$host_os" in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - -aix4*) - test "$enable_shared" = yes && enable_static=no - ;; -esac - -echo "$ac_t$enable_shared" 1>&6 - -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes - -echo "checking whether to build static libraries... $enable_static" 1>&6 - -if test "$hardcode_action" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi - -echo $ac_n "checking for objdir... $ac_c" 1>&6 -rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - objdir=_libs -fi -rmdir .libs 2>/dev/null -echo "$ac_t$objdir" 1>&6 - -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else -if eval "test \"`echo '$''{'lt_cv_dlopen'+set}'`\" != set"; then - lt_cv_dlopen=no lt_cv_dlopen_libs= -echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6 -echo "$progname:2248: checking for dlopen in -ldl" >&5 -ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-ldl $LIBS" -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - echo "$ac_t""no" 1>&6 -echo $ac_n "checking for dlopen""... $ac_c" 1>&6 -echo "$progname:2288: checking for dlopen" >&5 -if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -/* Override any gcc2 internal prototype to avoid an error. */ -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen(); - -int main() { - -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_dlopen) || defined (__stub___dlopen) -choke me -#else -dlopen(); -#endif - -; return 0; } -EOF -if { (eval echo $progname:2318: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_func_dlopen=yes" -else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_func_dlopen=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then - echo "$ac_t""yes" 1>&6 - lt_cv_dlopen="dlopen" -else - echo "$ac_t""no" 1>&6 -echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6 -echo "$progname:2335: checking for dld_link in -ldld" >&5 -ac_lib_var=`echo dld'_'dld_link | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-ldld $LIBS" -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" -else - echo "$ac_t""no" 1>&6 -echo $ac_n "checking for shl_load""... $ac_c" 1>&6 -echo "$progname:2375: checking for shl_load" >&5 -if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -/* Override any gcc2 internal prototype to avoid an error. */ -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char shl_load(); - -int main() { - -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_shl_load) || defined (__stub___shl_load) -choke me -#else -shl_load(); -#endif - -; return 0; } -EOF -if { (eval echo $progname:2405: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_func_shl_load=yes" -else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_func_shl_load=no" -fi -rm -f conftest* -fi - -if eval "test \"`echo '$ac_cv_func_'shl_load`\" = yes"; then - echo "$ac_t""yes" 1>&6 - lt_cv_dlopen="shl_load" -else - echo "$ac_t""no" 1>&6 -echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6 -echo "$progname:2423: checking for shl_load in -ldld" >&5 -ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-ldld $LIBS" -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" -else - echo "$ac_t""no" 1>&6 -fi - - -fi - - -fi - - -fi - - -fi - -fi - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - fi - - case "$lt_cv_dlopen" in - dlopen) -for ac_hdr in dlfcn.h; do -ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "$progname:2488: checking for $ac_hdr" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -int fnord = 0; -EOF -ac_try="$ac_compile >/dev/null 2>conftest.out" -{ (eval echo $progname:2498: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi -done - - if test "x$ac_cv_header_dlfcn_h" = xyes; then - CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - fi - eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - LIBS="$lt_cv_dlopen_libs $LIBS" - - echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6 -echo "$progname:2526: checking whether a program can dlopen itself" >&5 -if test "${lt_cv_dlopen_self+set}" = set; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test "$cross_compiling" = yes; then - lt_cv_dlopen_self=cross - else - cat > conftest.c < -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LTDL_GLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LTDL_GLOBAL DL_GLOBAL -# else -# define LTDL_GLOBAL 0 -# endif -#endif - -/* We may have to define LTDL_LAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LTDL_LAZY_OR_NOW -# ifdef RTLD_LAZY -# define LTDL_LAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LTDL_LAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LTDL_LAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LTDL_LAZY_OR_NOW DL_NOW -# else -# define LTDL_LAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -fnord() { int i=42;} -main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW); - if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord"); - if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); } - -EOF -if { (eval echo $progname:2580: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null -then - lt_cv_dlopen_self=yes -else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - lt_cv_dlopen_self=no -fi -rm -fr conftest* -fi - -fi - -echo "$ac_t""$lt_cv_dlopen_self" 1>&6 - - if test "$lt_cv_dlopen_self" = yes; then - LDFLAGS="$LDFLAGS $link_static_flag" - echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6 -echo "$progname:2599: checking whether a statically linked program can dlopen itself" >&5 -if test "${lt_cv_dlopen_self_static+set}" = set; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test "$cross_compiling" = yes; then - lt_cv_dlopen_self_static=cross - else - cat > conftest.c < -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LTDL_GLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LTDL_GLOBAL DL_GLOBAL -# else -# define LTDL_GLOBAL 0 -# endif -#endif - -/* We may have to define LTDL_LAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LTDL_LAZY_OR_NOW -# ifdef RTLD_LAZY -# define LTDL_LAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LTDL_LAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LTDL_LAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LTDL_LAZY_OR_NOW DL_NOW -# else -# define LTDL_LAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -fnord() { int i=42;} -main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW); - if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord"); - if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); } - -EOF -if { (eval echo $progname:2653: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null -then - lt_cv_dlopen_self_static=yes -else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - lt_cv_dlopen_self_static=no -fi -rm -fr conftest* -fi - -fi - -echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6 -fi - ;; - esac - - case "$lt_cv_dlopen_self" in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case "$lt_cv_dlopen_self_static" in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi - -# Copy echo and quote the copy, instead of the original, because it is -# used later. -ltecho="$echo" -if test "X$ltecho" = "X$CONFIG_SHELL $0 --fallback-echo"; then - ltecho="$CONFIG_SHELL \$0 --fallback-echo" -fi -LTSHELL="$SHELL" - -LTCONFIG_VERSION="$VERSION" - -# Only quote variables if we're using ltmain.sh. -case "$ltmain" in -*.sh) - # Now quote all the things that may contain metacharacters. - for var in ltecho old_CC old_CFLAGS old_CPPFLAGS \ - old_LD old_LDFLAGS old_LIBS \ - old_NM old_RANLIB old_LN_S old_DLLTOOL old_OBJDUMP old_AS \ - AR CC LD LN_S NM LTSHELL LTCONFIG_VERSION \ - reload_flag reload_cmds wl \ - pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \ - thread_safe_flag_spec whole_archive_flag_spec libname_spec \ - library_names_spec soname_spec \ - RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ - old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds postuninstall_cmds \ - file_magic_cmd export_symbols_cmds deplibs_check_method allow_undefined_flag no_undefined_flag \ - finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \ - hardcode_libdir_flag_spec hardcode_libdir_separator \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do - - case "$var" in - reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - export_symbols_cmds | archive_cmds | archive_expsym_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done - - case "$ltecho" in - *'\$0 --fallback-echo"') - ltecho=`$echo "X$ltecho" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` - ;; - esac - - trap "$rm \"$ofile\"; exit 1" 1 2 15 - echo "creating $ofile" - $rm "$ofile" - cat < "$ofile" -#! $SHELL - -# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) -# NOTE: Changes made to this file will be lost: look at ltconfig or ltmain.sh. -# -# Copyright (C) 1996-1999 Free Software Foundation, Inc. -# Originally by Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="sed -e s/^X//" - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi - -### BEGIN LIBTOOL CONFIG -EOF - cfgfile="$ofile" - ;; - -*) - # Double-quote the variables that need it (for aesthetics). - for var in old_CC old_CFLAGS old_CPPFLAGS \ - old_LD old_LDFLAGS old_LIBS \ - old_NM old_RANLIB old_LN_S old_DLLTOOL old_OBJDUMP old_AS; do - eval "$var=\\\"\$var\\\"" - done - - # Just create a config file. - cfgfile="$ofile.cfg" - trap "$rm \"$cfgfile\"; exit 1" 1 2 15 - echo "creating $cfgfile" - $rm "$cfgfile" - cat < "$cfgfile" -# `$echo "$cfgfile" | sed 's%^.*/%%'` - Libtool configuration file. -# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) -EOF - ;; -esac - -cat <> "$cfgfile" -# Libtool was configured as follows, on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# -# CC=$old_CC CFLAGS=$old_CFLAGS CPPFLAGS=$old_CPPFLAGS \\ -# LD=$old_LD LDFLAGS=$old_LDFLAGS LIBS=$old_LIBS \\ -# NM=$old_NM RANLIB=$old_RANLIB LN_S=$old_LN_S \\ -# DLLTOOL=$old_DLLTOOL OBJDUMP=$old_OBJDUMP AS=$old_AS \\ -# $0$ltconfig_args -# -# Compiler and other test output produced by $progname, useful for -# debugging $progname, is in ./config.log if it exists. - -# The version of $progname that generated this script. -LTCONFIG_VERSION=$LTCONFIG_VERSION - -# Shell to use when invoking shell scripts. -SHELL=$LTSHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host - -# An echo program that does not interpret backslashes. -echo=$ltecho - -# The archiver. -AR=$AR - -# The default C compiler. -CC=$CC - -# The linker used to build libraries. -LD=$LD - -# Whether we need hard or soft links. -LN_S=$LN_S - -# A BSD-compatible nm program. -NM=$NM - -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" - -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" - -# Used on cygwin: assembler. -AS="$AS" - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# How to create reloadable object files. -reload_flag=$reload_flag -reload_cmds=$reload_cmds - -# How to pass a linker flag through the compiler. -wl=$wl - -# Object file suffix (normally "o"). -objext="$objext" - -# Old archive suffix (normally "a"). -libext="$libext" - -# Executable file suffix (normally ""). -exeext="$exeext" - -# Additional compiler flags for building library objects. -pic_flag=$pic_flag - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$compiler_c_o - -# Can we write directly to a .lo ? -compiler_o_lo=$compiler_o_lo - -# Must we lock files when doing compilation ? -need_locks=$need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Whether dlopen is supported. -dlopen=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Compiler flag to prevent dynamic linking. -link_static_flag=$link_static_flag - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$no_builtin_flag - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$export_dynamic_flag_spec - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$whole_archive_flag_spec - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$thread_safe_flag_spec - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec=$libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$RANLIB -old_archive_cmds=$old_archive_cmds -old_postinstall_cmds=$old_postinstall_cmds -old_postuninstall_cmds=$old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$old_archive_from_new_cmds - -# Commands used to build and install a shared archive. -archive_cmds=$archive_cmds -archive_expsym_cmds=$archive_expsym_cmds -postinstall_cmds=$postinstall_cmds -postuninstall_cmds=$postuninstall_cmds - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$allow_undefined_flag - -# Flag that forces no undefined symbols. -no_undefined_flag=$no_undefined_flag - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$global_symbol_to_cdecl - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$hardcode_libdir_flag_spec - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$hardcode_libdir_separator - -# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var - -# Compile-time system search path for libraries -sys_lib_search_path_spec=$sys_lib_search_path_spec - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$fix_srcfile_path" - -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols - -# The commands to list exported symbols. -export_symbols_cmds=$export_symbols_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$exclude_expsyms - -# Symbols that must always be exported. -include_expsyms=$include_expsyms - -EOF - -case "$ltmain" in -*.sh) - echo '### END LIBTOOL CONFIG' >> "$ofile" - echo >> "$ofile" - case "$host_os" in - aix3*) - cat <<\EOF >> "$ofile" - -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -EOF - ;; - esac - - # Append the ltmain.sh script. - sed '$q' "$ltmain" >> "$ofile" || (rm -f "$ofile"; exit 1) - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - - chmod +x "$ofile" - ;; - -*) - # Compile the libtool program. - echo "FIXME: would compile $ltmain" - ;; -esac - -test -n "$cache_file" || exit 0 - -# AC_CACHE_SAVE -trap '' 1 2 15 -cat > confcache <<\EOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs. It is not useful on other systems. -# If it contains results you don't want to keep, you may remove or edit it. -# -# By default, configure uses ./config.cache as the cache file, -# creating it if it does not exist already. You can give configure -# the --cache-file=FILE option to use a different cache file; that is -# what configure does when it calls configure scripts in -# subdirectories, so they share the cache. -# Giving --cache-file=/dev/null disables caching, for debugging configure. -# config.status only pays attention to the cache file if you give it the -# --recheck option to rerun configure. -# -EOF -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -(set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote substitution - # turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - -e "s/'/'\\\\''/g" \ - -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' - ;; - esac >> confcache -if cmp -s $cache_file confcache; then - : -else - if test -w $cache_file; then - echo "updating cache $cache_file" - cat confcache > $cache_file - else - echo "not updating unwritable cache $cache_file" - fi -fi -rm -f confcache - -exit 0 - -# Local Variables: -# mode:shell-script -# sh-indentation:2 -# End: diff --git a/mkinstalldirs b/mkinstalldirs deleted file mode 100755 index f945dbf..0000000 --- a/mkinstalldirs +++ /dev/null @@ -1,38 +0,0 @@ -#! /bin/sh -# mkinstalldirs --- make directory hierarchy -# Author: Noah Friedman -# Created: 1993-05-16 -# Public domain - -errstatus=0 - -for file -do - set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` - shift - - pathcomp= - for d - do - pathcomp="$pathcomp$d" - case "$pathcomp" in - -* ) pathcomp=./$pathcomp ;; - esac - - if test ! -d "$pathcomp"; then - echo "mkdir $pathcomp" 1>&2 - - mkdir "$pathcomp" || lasterr=$? - - if test ! -d "$pathcomp"; then - errstatus=$lasterr - fi - fi - - pathcomp="$pathcomp/" - done -done - -exit $errstatus - -# mkinstalldirs ends here -- cgit v0.11.2