Documentation: white-spaces and minor formatting

1 files changed, 116 insertions, 116 deletions

diff --git a/doc/asciidoc/fluxbox.txt b/doc/asciidoc/fluxbox.txt
index 23a73d9..48041c6 100644
--- a/doc/asciidoc/fluxbox.txt
+++ b/doc/asciidoc/fluxbox.txt
@@ -300,19 +300,19 @@ item with the items detailed below:
 *Configure*::
     The next level under this menu is where you can set certain resources and
     really begin to customize the look and feel of your desktop. See the
-         *Configure Menu* section below for more details.
+     *Configure Menu* section below for more details.
 
 *System Styles*::
-         This is where the standard styles are listed. You can select one of these by
-         clicking on it, and it will be applied immediately.  System styles are
-         located in *@pkgdatadir@/styles/* upon a default install.  Remember that you
-         can confirm this with fluxbox -i.
+     This is where the standard styles are listed. You can select one of these by
+     clicking on it, and it will be applied immediately.  System styles are
+     located in *@pkgdatadir@/styles/* upon a default install.  Remember that you
+     can confirm this with fluxbox -i.
 
 *User Styles*:::
-         This is where your custom styles are listed. It will list any styles from
-         *~/.fluxbox/styles/*, which may be styles you grab from the Internet, or
-         your own custom styles, provided you follow the standards described in
-         *fluxbox-style(5)*.
+     This is where your custom styles are listed. It will list any styles from
+     *~/.fluxbox/styles/*, which may be styles you grab from the Internet, or
+     your own custom styles, provided you follow the standards described in
+     *fluxbox-style(5)*.
 
 *Workspace List*:::
     This is the same as the *Workspace Menu* detailed below.
@@ -330,21 +330,21 @@ item with the items detailed below:
 
 *Fluxbox Command*:::
     A little Commandline will popup where you can enter a fluxbox command. These
-         commands are the same as those detailed in *fluxbox-keys(5)*.
+     commands are the same as those detailed in *fluxbox-keys(5)*.
 
 *Reload config*:::
     Use this to reload the fluxbox configuration files. You must do this after
-         editing the `keys' file, `init' file, or the current style.
+     editing the `keys' file, `init' file, or the current style.
 
 *Restart*:::
     Restart the whole darn thing. This starts a completely new fluxbox process,
     rereads files and redraws all graphical elements. Running applications will
     remain open, however, and restored to the same workspaces they were
-         previously in once fluxbox returns.
+     previously in once fluxbox returns.
 
 *Exit*:::
     Exits fluxbox, which in turn either shuts down the X Window server or
-         returns you to the graphical login screen.
+     returns you to the graphical login screen.
 
 Configuration Menu
 ~~~~~~~~~~~~~~~~~~
@@ -355,25 +355,25 @@ faster way to change the most common settings.
 All changes take effect immediately.
 
 *Focus Model*:::
-         Lets you configure the window focus model. For details, see *FOCUS MODEL*,
-         below.
+     Lets you configure the window focus model. For details, see *FOCUS MODEL*,
+     below.
 
 *Maximize Options*:::
 Lets you configure what happens when you maximize a window. The four
 options are:
 +
 --
-        *Full Maximization*:;;
-                Normally, a maximized window will not overlap the toolbar, slit, or any
-                docked windows (like panels). Enabling this option allows maximized
-                windows to be as large as the actual screen resolution.
-        *Ignore Resize Increment*:;;
-                Normally, terminal windows specify a ``resize increment'' which mean
-                fluxbox will only resize the window to an even multiple of the character
-                size. Enabling this option will ignore this specification when maximizing.
-        *Disable Moving* / *Disable Resizing*:;;
-                Normally, maximized windows can still be moved and resized. Enabling these
-                options prevents these behaviour.
+    *Full Maximization*:;;
+        Normally, a maximized window will not overlap the toolbar, slit, or any
+        docked windows (like panels). Enabling this option allows maximized
+        windows to be as large as the actual screen resolution.
+    *Ignore Resize Increment*:;;
+        Normally, terminal windows specify a ``resize increment'' which mean
+        fluxbox will only resize the window to an even multiple of the character
+        size. Enabling this option will ignore this specification when maximizing.
+    *Disable Moving* / *Disable Resizing*:;;
+        Normally, maximized windows can still be moved and resized. Enabling these
+        options prevents these behaviour.
 --
 
 *Tab Options*:::
@@ -386,8 +386,8 @@ options are:
 
 *Toolbar*:::
     This menu can also be found by right-clicking any non-icon part of the
-         toolbar. Find more information about this menu's options in the *Toolbar
-         Menu* section, below.
+     toolbar. Find more information about this menu's options in the *Toolbar
+     Menu* section, below.
 
 *Transparency*:::
 This sets the default transparency for a focused windows, unfocused window and
@@ -408,7 +408,7 @@ titlebars, not window contents.
 
 *Workspace Warping*:::
     If enabled, you can drag windows from one workspace to another. The previous
-         workspace is to the left, the next workspace is to the right.
+     workspace is to the left, the next workspace is to the right.
 
 Window Menu
 ~~~~~~~~~~~
@@ -440,9 +440,9 @@ By default, this menu contains:
     * Button 3  (Un)Maximize window horizontally.
 
 *Iconify*:::
-         Iconify (or minimize) a window. The `icon' can be found in the Icons submenu
-         of the workspace menu as well as in the toolbar (if a Toolbar mode showing
-         Icons is selected).
+     Iconify (or minimize) a window. The `icon' can be found in the Icons submenu
+     of the workspace menu as well as in the toolbar (if a Toolbar mode showing
+     Icons is selected).
 
 *Raise*:::
     Raise the window above all others in the same layer.
@@ -455,7 +455,7 @@ By default, this menu contains:
 
 *Transparency*:::
     Change this window's transparency, overriding the defaults from the
-         *Configuration Menu*.
+     *Configuration Menu*.
 
 *Remember...*:::
 Specify which window settings should be stored in the `apps' file and
@@ -465,36 +465,36 @@ Specifically the setting you may store are:
 +
 --
 *Workpace:*;;
-        Open this in the same workspace as where the window currently resides.
+    Open this in the same workspace as where the window currently resides.
 *Jump to workspace:*;;
-        When *Workspace* is selected, fluxbox will jump to the appropriate workspace
-        when this window is opened there. If not selected, the window will open in
-        the background.
+    When *Workspace* is selected, fluxbox will jump to the appropriate workspace
+    when this window is opened there. If not selected, the window will open in
+    the background.
 *Head*:;;
-        For xinerama users only, start this window on the current head (or screen).
+    For xinerama users only, start this window on the current head (or screen).
 *Dimensions*:;;
-        Record the current window height and width.
+    Record the current window height and width.
 *Position*:;;
-        Record the current X and Y coordinates of the window.
+    Record the current X and Y coordinates of the window.
 *Sticky*:;;
-        Record whether the window is on all desktops, or not.
+    Record whether the window is on all desktops, or not.
 *Decorations*:;;
-        Record the current set of decorations (title bar, grips, tabs, etc) on the window.
+    Record the current set of decorations (title bar, grips, tabs, etc) on the window.
 *Shaded*:;;
-        Record whether the window is shaded (or rolled-up) or not.
+    Record whether the window is shaded (or rolled-up) or not.
 *Minimized*:;;
-        Record whether the window is iconified (or minimized) or not.
+    Record whether the window is iconified (or minimized) or not.
 *Maximized*:;;
-        Record whether the window is maximized or not.
+    Record whether the window is maximized or not.
 *Fullscreen*:;;
-        Record whether the window is in fullscreen mode or not.
+    Record whether the window is in fullscreen mode or not.
 *Transparency*:;;
-        Record the current *Transparency* settings.
+    Record the current *Transparency* settings.
 *Layer*:;;
-        Record the current layer.
+    Record the current layer.
 *Save on close*:;;
-        If selected, any of the above items which are also selected will be updated
-        with the window's current values as it is closed.
+    If selected, any of the above items which are also selected will be updated
+    with the window's current values as it is closed.
 
 --
 +
@@ -513,24 +513,24 @@ background. This menu contains entries to explore the currently defined
 workspaces, windows, and add/remove/rename workspaces.
 
 *Icons*:::
-        This menu shows any iconified (or, minimized) windows. Clicking on a window
-        in this menu will raise it on the current workspace.
+    This menu shows any iconified (or, minimized) windows. Clicking on a window
+    in this menu will raise it on the current workspace.
 
 'Workspaces':::
-        The next section provides one submenu per workspace. Middle-clicking on a
-        workspace name will take you to that workspace. The submenu contains a list
-        of all open windows on that workspace. Clicking on a window name will take
-        you to that window and raise it, changing the active workspace if necessary.
+    The next section provides one submenu per workspace. Middle-clicking on a
+    workspace name will take you to that workspace. The submenu contains a list
+    of all open windows on that workspace. Clicking on a window name will take
+    you to that window and raise it, changing the active workspace if necessary.
 
 *New Workspace*:::
-        This entry adds a new workspace to the end of the list of current workspaces.
+    This entry adds a new workspace to the end of the list of current workspaces.
 
 *Edit current workspace name*:::
-        Pops up a dialog to enter a new name for the current workspace.
+    Pops up a dialog to enter a new name for the current workspace.
 
 *Remove Last*:::
-        Remove the last workspace in the list. Any windows currently open there will
-        be sent to the next-to-last workspace.
+    Remove the last workspace in the list. Any windows currently open there will
+    be sent to the next-to-last workspace.
 
 TOOLBAR
 -------
@@ -596,18 +596,18 @@ All changes take effect immediately. Here are the settings:
     If this is enabled the toolbar will disappear after a defined time when the
     mouse pointer leaves the toolbar. It will slide in when the cursor hits the
     remaining edge of the toolbar. See the *session.autoRaiseDelay* resource for
-         the delay time.
+     the delay time.
 
 *Toolbar width percentage*:::
-         Sets the width of the toolbar in a percentage of your total screen size. Use
-         the left mouse button to decrease and the right mouse-button to increase the
-         value. The value can be from 1-100.
+     Sets the width of the toolbar in a percentage of your total screen size. Use
+     the left mouse button to decrease and the right mouse-button to increase the
+     value. The value can be from 1-100.
 
 *Maximize Over*:::
-         Enabling this option will allow windows to maximize over the toolbar.  With
-         this switched on they will only expand to the edge of the bar.  This option
-         may be overridden by the ``Full Maximization'' from the *Configuration
-         Menu*.  If that option is enabled, this option will have no effect..
+     Enabling this option will allow windows to maximize over the toolbar.  With
+     this switched on they will only expand to the edge of the bar.  This option
+     may be overridden by the ``Full Maximization'' from the *Configuration
+     Menu*.  If that option is enabled, this option will have no effect..
 
 *Layer...*:::
     This sets the layer on which the toolbar is set. With this you can set the
@@ -629,19 +629,19 @@ The first section outlines what types of windows will be shown in the iconbar:
 +
 --
 *None*:;;
-        Will not show any windows
+    Will not show any windows
 *Icons*:;;
-        Shows windows from all workspaces that are iconified (or, minimized)
+    Shows windows from all workspaces that are iconified (or, minimized)
 *NoIcons*:;;
-        Shows windows from all workspaces that are not iconified
+    Shows windows from all workspaces that are not iconified
 *WorkspaceIcons*:;;
-        Shows windows from the current workspace that are iconified
+    Shows windows from the current workspace that are iconified
 *WorkspaceNoIcons*:;;
-        Shows windows from the current workspace that are not iconified
+    Shows windows from the current workspace that are not iconified
 *Workspace*:;;
-        Shows all windows (iconified or not) from the current workspace
+    Shows all windows (iconified or not) from the current workspace
 *All Windows*:;;
-        Shows all windows (iconified or not) from all workspaces
+    Shows all windows (iconified or not) from all workspaces
 
 --
 +
@@ -651,11 +651,11 @@ resource:
 +
 --
 *Left*:;;
-        All icons will be left-aligned with the width set in the `init' file
+    All icons will be left-aligned with the width set in the `init' file
 *Relative*:;;
-        All icons will be sized evenly to fill the iconbar completely
+    All icons will be sized evenly to fill the iconbar completely
 *Right*:;;
-        All icons will be right-aligned with the width set in the `init' file
+    All icons will be right-aligned with the width set in the `init' file
 
 --
 +
@@ -699,16 +699,16 @@ one of the first two and one of the last two. They are:
 There are three more settings in the ``Focus Model'' menu:
 
 *Focus New Windows*:::
-        If enabled, a new window will grab X focus as soon as it is opened.
+    If enabled, a new window will grab X focus as soon as it is opened.
 
 *Auto Raise*::
-        If enabled, focusing on a new window will automatically raise that window
-        above all others within its layer. When disabled, you must explicitly raise a
-        focused window using the window menu, keybinding, or *Click Raises*.
+    If enabled, focusing on a new window will automatically raise that window
+    above all others within its layer. When disabled, you must explicitly raise a
+    focused window using the window menu, keybinding, or *Click Raises*.
 
 *Click Raises*::
-        If enabled, clicking anywhere on a window will raise it above all others
-        within its layer.
+    If enabled, clicking anywhere on a window will raise it above all others
+    within its layer.
 
 TAB OPTIONS
 -----------
@@ -726,7 +726,7 @@ tabs. Inside of it there are three main options:
 *Maximize Over*:::
     When this option is on, maximizing a window will disregard the size and
     location of external tabs, which means they may be pushed out of the screen
-         entirely.
+     entirely.
 
 *External Tab Width*:::
     This specifies in pixels the width of external tabs.
@@ -786,14 +786,14 @@ All changes take effect immediately. Here are the settings:
     If this is enabled the slit will disappear after a defined time when the
     mouse pointer leaves the slit. It will slide in when the cursor hits the
     remaining edge of the slit. See the *session.autoRaiseDelay* resource for
-         the delay time.
+     the delay time.
 
 *Maximize Over*:::
-         Enabling this option will allow windows to maximizing over the slit.  With
-         this switched off they will only expand to the edge of the slit.  This
-         option may be overridden by the ``Full Maximization'' from the
-         *Configuration Menu*. If that option is enabled, this option will have no
-         effect..
+     Enabling this option will allow windows to maximizing over the slit.  With
+     this switched off they will only expand to the edge of the slit.  This
+     option may be overridden by the ``Full Maximization'' from the
+     *Configuration Menu*. If that option is enabled, this option will have no
+     effect..
 
 *Alpha*:::
     This sets the alpha value for the slit. Use the left mouse button to
@@ -802,11 +802,11 @@ All changes take effect immediately. Here are the settings:
 
 *Clients*:::
     This submenu lets you reorder the the applications running in the
-         slit. You are able to hide apps from the slit by unselecting them in the
-         list showing. This will not kill the app. You can make them re-appear by
-         selecting them in the list. The "Save SlitList" option saves the new order
-         to you slitlist located in *~/.fluxbox/slitlist*.  See the next section for
-         details.
+     slit. You are able to hide apps from the slit by unselecting them in the
+     list showing. This will not kill the app. You can make them re-appear by
+     selecting them in the list. The "Save SlitList" option saves the new order
+     to you slitlist located in *~/.fluxbox/slitlist*.  See the next section for
+     details.
 
 Slitlist File
 ~~~~~~~~~~~~~
@@ -889,8 +889,8 @@ These allow users to place the slit and toolbar where they like.
 +
 --
 Possible options are:;;
-        *BottomLeft* *BottomCenter* *BottomRight* *LeftBottom* *LeftCenter* *LeftTop*
-        *RightBottom* *RightCenter* *RightTop* *TopLeft* *TopCenter* *TopRight*
+    *BottomLeft BottomCenter BottomRight LeftBottom LeftCenter LeftTop
+    RightBottom RightCenter RightTop TopLeft TopCenter TopRight*
 --
 +
 Slit default: *RightBottom*
@@ -930,8 +930,8 @@ They may be specified in any order, delimited by the *,* character.
 They will appear in the order given.
 +
 Possible tools:;;
-*clock* *iconbar* *nextwindow* *prevwindow* *nextworkspace* *prevworkspace*
-*systemtray* *workspacename*
+*clock iconbar nextwindow prevwindow nextworkspace  prevworkspace
+systemtray workspacename*
 +
 Default:;;
 *workspacename, prevworkspace, nextworkspace, iconbar, prevwindow, nextwindow,
@@ -1178,7 +1178,7 @@ may specify any number, space-delimited.
 +
 --
 The available options are:;;
-        *Close* *Maximize* *MenuIcon* *Minimize* *Shade* *Stick* *LHalf* *RHalf*
+    *Close Maximize MenuIcon Minimize Shade Stick LHalf RHalf*
 --
 +
 Default left: *Stick*
@@ -1194,33 +1194,33 @@ files. This is where you can specify different files. Most of the defaults will
 be located in the user's *~/.fluxbox* directory.
 
 *session.appsFile*: 'location'::
-        Location of persistent application settings, or the `apps' file. See the
-        *Remember...* item in the *Window Menu* section above or *fluxbox-apps(5)*
-        for details.
+    Location of persistent application settings, or the `apps' file. See the
+    *Remember...* item in the *Window Menu* section above or *fluxbox-apps(5)*
+    for details.
 
 *session.groupFile*: 'location'::
-        Deprecated, auto-grouping is now done in the `apps' file, see
-        *fluxbox-apps(5)* for details.
+    Deprecated, auto-grouping is now done in the `apps' file, see
+    *fluxbox-apps(5)* for details.
 
 *session.keyFile*: 'location'::
-        Location of the keyboard mapping settings, or the `keys' file.
-        See *fluxbox-keys(5)* for details.
+    Location of the keyboard mapping settings, or the `keys' file.
+    See *fluxbox-keys(5)* for details.
 
 *session.menuFile*: 'location'::
-        Location of the Root Menu file.
-        See *fluxbox-menu(5)* for details.
+    Location of the Root Menu file.
+    See *fluxbox-menu(5)* for details.
 
 *session.slitlistFile*: 'location'::
-        Location of the file used to remember slit client ordering.
-        See *SLIT* above for details.
+    Location of the file used to remember slit client ordering.
+    See *SLIT* above for details.
 
 *session.styleFile*: 'location'::
-        Location of the currently selected style.
-        See *fluxbox-style(5)* for details.
+    Location of the currently selected style.
+    See *fluxbox-style(5)* for details.
 
 *session.styleOverlay*: 'location'::
-        Location of the style overlay file.
-        See *fluxbox-style(5)* for details.
+    Location of the style overlay file.
+    See *fluxbox-style(5)* for details.
 
 *session.screen0.windowMenu*: 'location'::
 This optionally specifies the location of a user-defined window menu. If left